Firmware V1 documentation · V1.0-rc54-2d701ce
Koheron products currently ship with firmware V0.x by default. Firmware V1 is under active development and is not publicly available yet.
Contact us if you would like early access or want to evaluate V1 firmware on your device.
kprop
Set or read the proportional gain of the temperature controller.
Usage
>> kprop
0.270
>> kprop 0.5
0.500Notes
Use a floating-point value. The unit depends on the product output stage and is shown in the command API table.
kprop is the proportional gain of the TEC PID controller. The PID error is in °C. For voltage-output products, kprop is in V/°C. For HTC200, kprop is in A/°C.