Products

Quad-channel adjustable power supply

195 €

Quad-channel adjustable power supply. Delivers up to 15 V and down to -9 V.

Quad-channel bipolar voltage source

645 €

Quad-channel -/+5 V +/-40 mA precision voltage source. Low wideband and high-stability for sensitive devices (voltage controlled oscillators, Mach-Zehnder modulators...)

Laser servo controller

545 €

Laser servo controller with PI² loop filter. Control bandwidth of 5 MHz and voltage noise density below 5 nV / √Hz.

OEM PCB-mount laser diode driver

55 €

Compact, power-efficient OEM PCB-mount low-noise laser driver with 12 V compliance voltage and a 3 V - 36 V input voltage range.

Digital butterfly laser diode controller

1245 €

Low noise current driver with modulation combined with a TEC controller for laser currents up to 600 mA. Designed for narrow-linewidth laser diodes in butterfly package. Current noise density of 450 pA / √Hz.

High sensitivity photodetector

195 €

InGaAs transimpedance amplified photodetector with a Noise Equivalent Power (NEP) below 1 pW / √Hz between 100 Hz and 100 kHz.

Laser Board for the Red Pitaya

495 €

Features a 1550 nm DFB laser and a 60 MHz photodetector for laser control and modulation. Provided with a reference FPGA design for real-time signal processing.

250 MSPS acquisition board

2190 €

Zynq® (FPGA / CPU) board with 100 MHz RF front end. Features two 14-bit ADC channels and two 16-bit DAC channels, both at 250 MSPS. RF ADC and DAC are clocked by an ultra-low jitter clock generator. Includes 4 channel 24-bit ADC and 4 channel 16-bit DAC.

1.2 A, 12 V ultra low noise laser driver

245 €

Drives up to 1200 mA of laser current with an ultra low current noise density of 450 pA/√Hz.

Low noise butterfly laser diode controller

990 €

Low noise current driver with modulation combined with a TEC controller for laser currents up to 400 mA. Designed for narrow-linewidth laser diodes in butterfly package. Current noise density of 450 pA / √Hz.

Low noise laser diode driver with modulation

275 €

Drives up to 200 mA of laser current with an ultra low current noise of 250 nA_rms (10 Hz to 1 MHz). Features a modulation input with 5 MHz bandwidth at 3 dB.

Dual logarithmic photodetector

295 €

High dynamic range dual photodetection with log(A), log(B) and log(A/B) outputs.

Linear temperature controller

245 €

Features a high-precision analog front-end, an analog PID loop with adjustable gains, and a driving stage able to drive up to 1 A current.

Low noise laser diode driver

90 €

Drives up to 200 mA of laser current with an ultra low current noise of 300 nA_rms (10 Hz to 1 MHz). Works with linear or switching supplies down to 3 V.

100 MHz balanced photodetector

295 €

Operates between 900 and 1700 nm. Amplified balanced photodetector with 39 kV/A gain, 100 MHz bandwidth at 3 dB and a common-mode rejection ratio of 35 dB.

1550 nm low-noise DFB laser

345 €

1550 nm low-noise DFB laser, 3 MHz linewidth, with integrated current driver. Features an AC-coupled modulation input for current modulation (1 kHz - 200 MHz) and an integrated 100 MHz photodetection.

Low noise photodetector

175 €

Amplified 100 MHz InGaAs photodetector. Operates between 900 and 1700 nm. Designed for shot noise limited operation with hundreds of µW of incident power.

200 MHz TTL-analog photodetector

245 €

InGaAs photodetector with a dual TTL-analog output. Analog output gain of 500 V/A and 200 MHz bandwidth. TTL output switches from 0 to 2.7 V with 3 ns propagation delay and 1.5 ns rise/fall times.