BOARD_OVERTEMPERATURE
BOARD_OVERTEMPERATURE error in Koheron V1 firmware.Koheron products currently ship with firmware V0.x by default. Firmware V1 is under active development and is not publicly available yet.
Contact us if you would like early access or want to evaluate V1 firmware on your device.
BOARD_OVERTEMPERATURE is a common Koheron V1 firmware error. The board temperature exceeded an allowed limit.
| Field | Value |
|---|---|
| Error | BOARD_OVERTEMPERATURE |
| Bit | 8 |
| Mask | 00000100 |
| Scope | Common |
| Raised by current firmware | Yes |
Meaning
The board temperature is above an allowed operating limit. Product behavior after this error may differ by device.
Typical causes
Ambient temperature too high; insufficient airflow; device operating outside its specified thermal conditions.
Recommended action
Reduce ambient temperature, improve ventilation, and allow the device to cool. Check the product documentation for operating limits before resuming operation.
Related commands
Use logerr to inspect the status snapshot associated with the last error.