CMD_ARG_OUT_OF_RANGE
CMD_ARG_OUT_OF_RANGE error in Koheron V1 firmware.Koheron products currently ship with firmware V0.x by default. Firmware V1 is under active development and is not publicly available yet.
Contact us if you would like early access or want to evaluate V1 firmware on your device.
CMD_ARG_OUT_OF_RANGE is a common Koheron V1 firmware error. A well-formed numeric value is outside the allowed limits.
| Field | Value |
|---|---|
| Error | CMD_ARG_OUT_OF_RANGE |
| Bit | 4 |
| Mask | 00000010 |
| Scope | Common |
| Raised by current firmware | Yes |
Meaning
The command and argument format were valid, but the numeric value cannot be accepted because it is below or above the range supported by the command or current product.
Typical causes
The requested value is outside the limits shown by the connected product's command API, or a product-specific operating limit has been exceeded.
Recommended action
Read the command's documented range for the connected product, correct the value, and retry the command. If the reported value appears inconsistent with the product documentation, record the command response and inspect the active error list with errlist.
CMD_ARG_OUT_OF_RANGE is distinct from CMD_INVALID_ARG, which covers malformed values, wrong argument counts, and invalid request shapes.