OUTPUT_UNDERTEMPERATURE
OUTPUT_UNDERTEMPERATURE error in Koheron V1 firmware.Koheron products currently ship with firmware V0.x by default. Firmware V1 is under active development and is not publicly available yet.
Contact us if you would like early access or want to evaluate V1 firmware on your device.
OUTPUT_UNDERTEMPERATURE is a common Koheron V1 firmware error. A monitored output temperature was below an allowed limit.
| Field | Value |
|---|---|
| Error | OUTPUT_UNDERTEMPERATURE |
| Bit | 11 |
| Mask | 00000800 |
| Scope | Common |
| Raised by current firmware | Yes |
Meaning
A monitored output temperature is below an allowed operating limit. Product behavior after this error may differ by device.
Typical causes
Cold ambient conditions; load or sensor temperature below the configured operating range.
Recommended action
Bring the output or load back within the allowed temperature range before clearing the error. Check the product documentation for operating limits.
Related commands
Use logerr to inspect the status snapshot associated with the last error.