Firmware V1 documentation ยท V1.0-rc54-2d701ce
Koheron products currently ship with firmware V0.x by default. Firmware V1 is under active development and is not publicly available yet.
Contact us if you would like early access or want to evaluate V1 firmware on your device.
vston
Disable, enable, or read the VSTEC output state.
Usage
>> vston
0
>> vston 1
1
>> vston 0
0Product behavior
| Product | Access | Write arguments | Read response | Notes |
|---|---|---|---|---|
| CTL300E, CTL300P | Normal write | vston 0 or vston 1 |
0 or 1 |
0 disables the VSTEC output. 1 requests the VSTEC output to enable. |
| TEC200 | Normal write | vston 0 or vston 1 |
0 or 1 |
After a valid write, TEC200 resets vtec to its default voltage before printing the output state. |
| HTC200 | Read-only | none | 0 or 1 |
The write form is not available. |
Notes
A write of 0 disables the VSTEC output. A write of 1 requests VSTEC output enable on products where the command is writable. Other values are invalid. Verify the connected load, vstec, and vtec before enabling the output.