EEPROM_CONFIG_CRC
EEPROM_CONFIG_CRC error in Koheron V1 firmware.Koheron products currently ship with firmware V0.x by default. Firmware V1 is under active development and is not publicly available yet.
Contact us if you would like early access or want to evaluate V1 firmware on your device.
EEPROM_CONFIG_CRC is a common Koheron V1 firmware error. The saved EEPROM configuration CRC is invalid.
| Field | Value |
|---|---|
| Error | EEPROM_CONFIG_CRC |
| Bit | 6 |
| Mask | 00000040 |
| Scope | Common |
| Raised by current firmware | Yes |
Meaning
The saved EEPROM configuration CRC is erased, missing, or mismatched. The firmware may ignore the saved configuration and keep the product default configuration active instead.
Typical causes
No saved configuration has been written; saved configuration data is incomplete or corrupted; the saved CRC does not match the saved configuration.
Recommended action
Review the active configuration. If the current configuration should be saved, run save to write a new saved configuration CRC. Use ecrc to report the saved configuration CRC.
Related commands
save writes a new saved configuration CRC. ecrc reports the saved configuration CRC.