Firmware V1 documentation ยท V1.0-rc54-2d701ce

Koheron products currently ship with firmware V0.x by default. Firmware V1 is under active development and is not publicly available yet.

Contact us if you would like early access or want to evaluate V1 firmware on your device.

brate

Advanced write V1.0-rc54-2d701ce All

Read or set the configured UART baud rate.

With no argument, brate prints the configured UART baud rate. With one supported baud-rate value, it updates the configured value and prints the resulting value.

Usage

>> brate
115200
>> brate 230400
230400
>> save
A1B2

Notes

Supported values are 9600, 19200, 38400, 57600, 115200, 230400, and 460800.

The new baud rate is effective after the next boot of the board. Use save after brate if the new value should be restored at boot. The saved value is loaded only when the CFG switch is set to 1 at boot.