Koheron products currently ship with firmware V0.x by default. Firmware V1 is under active development and is not publicly available yet.
Contact us if you would like early access or want to evaluate V1 firmware on your device.
errmsk
Read or set the error mask used for alarm reporting.
With no argument, errmsk prints the current error mask in hexadecimal. With one hexadecimal argument, it sets the running error mask and prints the resulting mask. Invalid hexadecimal input is rejected and reports CMD_INVALID_ARG. A valid write shape made from a user mode that is too low reports CMD_ACCESS_DENIED. Writes require normal mode or higher.
Usage
>> errmsk
ffffffff
>> errmsk fffffffe
fffffffeNotes
The error mask selects which error bits contribute to masked alarm/status reporting. It does not clear active errors; use errclr for clearing.
Use save after changing errmsk if the error mask should be restored at boot. The saved value is loaded only when the CFG switch is set to 1 at boot.