Firmware V1 documentation ยท V1.0-rc54-2d701ce

Koheron products currently ship with firmware V0.x by default. Firmware V1 is under active development and is not publicly available yet.

Contact us if you would like early access or want to evaluate V1 firmware on your device.

bdid

Advanced write V1.0-rc54-2d701ce All

Read or set the board ID used by UART multiplexing.

With no argument, bdid prints the board ID as an unsigned decimal integer. With one decimal argument, it sets the board ID when the current access mode allows the change and prints the current value.

Usage

>> bdid
1
>> bdid 2
2

Notes

The board ID is used when muxon enables UART multiplexing. See UART multiplexing.

Use save after changing bdid if the board ID should be restored at boot. The saved value is loaded only when the CFG switch is set to 1 at boot.