Koheron products currently ship with firmware V0.x by default. Firmware V1 is under active development and is not publicly available yet.
Contact us if you would like early access or want to evaluate V1 firmware on your device.
regs
Read or write sequencer registers.
With no argument, regs prints all 16 sequencer register values, separated by spaces. With one hexadecimal register index from 0 through F, it prints that register. With a hexadecimal register index and a hexadecimal value, it writes the register when the current access mode allows the change and then prints the current register value.
Usage
>> regs
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>> regs A FFFFFFFF
FFFFFFFF
>> regs A
FFFFFFFF
>> save
A1B2
>>Notes
Register writes change the current sequencer register values. Use save after changing regs if the register values should be restored at boot. The saved values are loaded only when the CFG switch is set to 1 at boot.
See Sequencer for register behavior and examples using sequ.