sequ

Read or set the sequencer enable state.

With no argument, sequ prints 0 when sequenced execution is disabled and 1 when it is enabled. With 0 or 1, it updates the current state when the current access mode allows the change and then prints the current state.

Usage

>> sequ
0
>> sequ 1
1
>> save
A1B2

Notes

sequ 1 starts loading and executing the sequence stored in user memory. sequ 0 stops execution. After completion, an error, or an explicit stop, the terminal execution status remains available through seqstat.

To restart the sequencer, use the normal control transition: set sequ 0 and then set sequ 1. Setting the already-enabled state to 1 again does not restart execution.

Use save after changing sequ if the enable state should be restored at boot. The saved value is loaded only when the CFG switch is set to 1 at boot.

See Sequencer for sequence format, examples, and use with regs.